DSE891 DSEWebNet® Gateway - Ethernet Only Product Downloads

The Gateway DSE891 connects to the DSE data server by an integral Ethernet connection only. This is most suited for fixed installations where an ADSL / DSL cable broadband service is available (external broadband modem required, not supplied by DSE).

DSEM840 MKI 4.3" Programmable Display Product Downloads

The DSEM840 is a 4.3" programmable display developed for use on vehicles and off-highway machinery. The display provides high levels of flexibility for multiple application types and is configured using CODESYS 3.5. The M840 can be used as a stand alone product or with additional M-Series products to create extremely powerful applications. 

DSE9484 12 volt 30 amp Intelligent Battery Charger Product Downloads

The DSE9484 is an intelligent 12-volt, 30 amp switch mode battery charger that can be programmed for different charging curves. This helps to maximise battery life. The charger is programmed using the DSE Configuration Suite Software. The charger is chassis mounted and has three built-in LEDs to indicate current charging status and fault conditions. The charger continues to operate during cranking and running and accepts multiple AC voltage connections. 

DSE8860 Auto Transfer Switch & Mains (Utility) Graphical Colour Display Control Module Product Downloads

The DSE8860 is an intelligent graphical colour display single or multi-mains (utility) controller with automatic transfer switch capabilities. The control module synchronises single or multiple set systems in conjunction with DSE synchronising & load share control modules. 

DSE556 Auto Transfer Switch/Mains (Utility) Control Module Product Downloads

DSE9479 24 Volt 100 Amp Intelligent Battery Charger Product Downloads

The DSE9479 is a 24 Volt, 100 Amp Intelligent Battery Charger, designed with the power industry in mind, with quality, reliability and efficiency built in as standard. The DSE9479 can be programmed for different charging curves to maximise the life of the batteries. The battery charger is programmed using the user-friendly DSE Configuration Suite PC Software. 

DSE720 Auto Mains (Utility) Failure Control Module Product Downloads

The DSE720 is an Automatic Mains (Utility) Failure Control Module suitable for a wide variety of single diesel or gas genset applications. Monitoring an advanced list of engine parameters, the DSE720 will automatically shut down the engine or indicate a warning, on detection of a fault condition. The fault is indicated on the module’s front panel LCD display or LED. The module can be easly configured using the DSE810 interface and PC Software. The module can be controlled from a PC that is...

DSE865 RS485 Single-Set Communications Device Product Downloads

The DSE865 is an intelligent RS485 communications device that allows single or multiple generating sets to be monitored over a LAN or WAN connection. The device includes software to assign a TCP/IP address to a COM port on a PC.  The COM port needs to be selected by the user, using the control modules PC software. Once the COM port is selected the user has instant communication with their control module. In order to use over a LAN connection the on-site router must be configured to be...

DSE860 RS232 Single-Set Communications Device Product Downloads

The DSE860 is an intelligent RS232 communications device that allows single or multiple generating sets to be monitored over a LAN or WAN connection. The device includes software to assign a TCP/IP address to a COM port on a PC.  The COM port needs to be selected by the user, using the control modules PC software. Once the COM port is selected the user has instant communication with their control module. In order to use over a LAN connection the on-site router must be configured to be...

DSEM240 CAN Slave Unit Product Downloads

The DSEM240 is a CAN Slave Unit designed for use on vehicles and off-highway machinery. Developed to provide additional I/O for expanding networks, the DSEM240 works with any J1939/CAN open network. The M240 can be used with both DSE and 3rd party equipment and can be configured using any CAN tool.